Click the above photo
to see how they
made records for this machine.

Condition:
This Victrola is in excellent condition. The original Shellac finish is beautiful with few flaws.
Nickel plating is still bright and shiny, except for the front cabinet knobs.
Features:
Shellac finished mahogany * Nickel plated hardware * Exhibition sound box * Semi-automatic shut-off
* Victrola motor with two springs * Speed control * 8 Shelf storage * Adjustable horn volume
Everything is believed original except for the (2) main springs, governor springs, soundbox seals, the lid key and leather brake pads.
History:
This phonograph was acquired in 2003 and history is not known.

Most people don't know the operation of this equipment so I thought I'd do a brief description:

1. First you need a record which was recorded acoustically...that is pre-1930. Newer records are made of softer materials and will not tolerate the heavy steel needle. Place the record on the turntable, groove side up. (Many records of the period are single sided)
2. Needles are good for one play on one side, so choose a new Loud, Medium or Soft style needle and secure it in the soundbox.
3. Wind the machine up. (Never say crank) 30 Winds maximum will play two sides of a 12 inch record or 4 sides of a 10 inch record.
4. All records were not recorded at 78RPM, so you may need to change the knob controlling the speed.
5. Set the semi-automatic stop mechanism if you wish, release the brake on the turntable and give it a little spin with your fingertip.
6. Gently swing the soundbox/needle down to near the records edge and guide it into the groove.
7. If you want more volume, open up the doors restricting the horn (The two smaller doors on the front of the machine). If it's too loud then close them.

The only thing left is to enjoy the sounds recorded more than 77 years ago.